The New infeed design comes standard. With 8 hourglass rolls designed to bring the log to the middle for a straight cut, this
machine can handle even the most crooked an knotty logs.
A 2x24 cylinder controls the down pressure, and the V-Clamp design brings the log to the middle to ensure a quality cut all the way down to the last block. This simple design can clamp securely to knotty and crooked logs so the
firewood just keep coming
Hydraulic 4 way wedge that can be moved up or down to center it on your wood. The 4 way goes below the beam so you can split just two ways.
Handles 22’ long by 22” in diameter
The PTO 1 comes standard with a 12’ long skidway
Shown with Optional Built-Rite Multi-Wedge, classic scissor clamp design
The PTO 1 requires a minimum 35 H.P. Tractor
A powerful 25” hydraulic chainsaw with a Oregon Processor bar
Feature and production wise the PT0 1 tractor powered
firewood processor operates very similar to the 30SCP. A great alternative to the self-contained units for a lot less money.
The PT0 1 tractor powered firewood processor requires a min. 35 H.P. tractor and uses 21 G.P.M. 540 R.P.M.
PTO pump.
- Pump - 21 GPM 540 RPM PTO Pump
- Splitter Cylinder Size - 4x24 with a 2 inch rod
- Full 1 Year warranty
- New infeed roller design
- New V-Clamp design
- Chainsaw bar - 25” Oregon Processor bar .404 chain
- Sprocket size - 8 tooth
- Hydraulic Tank - 25 gallon
- Fuel Tank - 16.7 Gallon
- Bar Oil Tank - 5 Gallon
- Wedge - 4 way hydraulic wedge
- Machine Weight - 6400 lbs.
- Transport length 26’
- Transport Width - 7’ 6 “
- Hitch - 2” coupler
- Trough length - 16’
- Axles - 2 Torflex
- Deck - 12’ skidway
- Hourly Production - 2-3 cords per hour
- Removable Operators Seat
- Patented Built-Rite Multi-Wedge allowing you to split 2, 4, and 6 or 8 ways without removing wedges
- 2 strand live deck with log stops
